Let’s Get Basted in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let’s Get Basted” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 45 mm (3.94 × 1.75 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 21: 14 outer edges and 7 cut-outs |
| Cut length | 896 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 256 curve and line segments |
Measured from the file. PNG: 2,000 × 933 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.45 in (25 × 11 mm) | 0.56 mm | 228 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.89 in (51 × 23 mm) | 1.1 mm | 455 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.34 in (76 × 34 mm) | 1.7 mm | 683 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.78 in (102 × 45 mm) | 2.2 mm | 910 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.67 in (152 × 68 mm) | 3.4 mm | 1,366 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.56 in (203 × 90 mm) | 4.5 mm | 1,821 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.34 in (305 × 136 mm) | 6.7 mm | 2,731 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let’s Get Basted SVG files
-
Let’s Get Basted in Amatic SC Solid · 14 pieces
-
Let’s Get Basted in block capitals Solid · 14 pieces
-
Let’s Get Basted in script and capitals Solid · 10 pieces
-
Let’s Get Basted with stars Solid · 14 pieces
-
Let’s Get Basted outline lettering Outline · 15 pieces
-
Let’s Get Basted stencil plate Solid · one piece
-
Let’s Get Basted with a drop shadow Layered · 9 pieces
-
Let’s Get Basted with a turkey Solid · 11 pieces
← Let’s Get Basted in Lilita One All 13 Let’s Get Basted designs Let’s Get Basted in Amatic SC →