Free Let’s Get Basted SVG

Let’s Get Basted in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let’s Get Basted in Pacifico, as a solid black shape
Let’s Get Basted in Pacifico. The preview is the SVG file itself.

“Let’s Get Basted” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 63 mm (3.94 × 2.46 in), scales to any size
Pieces6 separate pieces
Outlines to cut16: 6 outer edges and 10 cut-outs
Cut length1,077 mm at this size
Narrowest part1.5 mm at this size
Nodes369 curve and line segments

Measured from the file. PNG: 2,000 × 1,281 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.38 mm274 mm140Too fine for most machines
2 × 1.25 in (51 × 32 mm)0.76 mm547 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.88 in (76 × 48 mm)1.1 mm821 mm15Vinyl, card and thin sheet
4 × 2.5 in (102 × 64 mm)1.5 mm1,094 mm8Vinyl, card and thin sheet
6 × 3.76 in (152 × 95 mm)2.3 mm1,641 mm3Vinyl, card and thin sheet
8 × 5.01 in (203 × 127 mm)3 mm2,188 mm2Any material, including 3 mm wood and acrylic
12 × 7.51 in (305 × 191 mm)4.6 mm3,283 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Basted SVG files

← Let’s Get Basted with a turkey All 13 Let’s Get Basted designs Let’s Get Basted in Lobster →