Free leopard SVG

Leaping leopard SVG

Leaping leopard, as a solid black shape — Leaping leopard. The preview is the SVG file itself.

A leopard at full stretch in a leap, front paws reaching and back legs trailing, the tail streaming out behind. Rosettes on the body and dots on the legs, in one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 46 mm (3.94 × 1.83 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	62: 1 outer edge and 61 cut-outs
Cut length	804 mm at this size
Narrowest part	1.4 mm at this size
Nodes	529 curve and line segments

Measured from the file. PNG: 2,000 × 969 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.46 in (25 × 12 mm)	0.36 mm	204 mm	180	Too fine for most machines
2 × 0.93 in (51 × 24 mm)	0.71 mm	408 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.39 in (76 × 35 mm)	1.1 mm	613 mm	21	Vinyl, card and thin sheet
4 × 1.86 in (102 × 47 mm)	1.4 mm	817 mm	10	Vinyl, card and thin sheet
6 × 2.78 in (152 × 71 mm)	2.1 mm	1,225 mm	4	Vinyl, card and thin sheet
8 × 3.71 in (203 × 94 mm)	2.8 mm	1,634 mm	3	Vinyl, card and thin sheet
12 × 5.57 in (305 × 141 mm)	4.3 mm	2,451 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Sitting leopard All 12 leopards Leopard face →