Free leopard SVG

Layered leopard in three colours SVG

Layered leopard in three colours, in layered colours
Layered leopard in three colours. The preview is the SVG file itself.

Three layers to stack, facing right: a golden leopard, a pale underside for the chest, belly and inner legs, and the dark rosettes, dots and eye on top. The rosettes cut as loose pieces, so move them with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 47 mm (3.94 × 1.86 in), scales to any size
Pieces59 separate pieces
Outlines to cut59 outlines
Cut length1,147 mm at this size
Narrowest part5.1 mm at this size
Nodes644 curve and line segments
Layers3: leopard, underside and rosettes

Measured from the file. PNG: 2,000 × 987 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)1.3 mm291 mm180Vinyl, card and thin sheet
2 × 0.95 in (51 × 24 mm)2.6 mm583 mm50Vinyl, card and thin sheet
3 × 1.42 in (76 × 36 mm)3.9 mm874 mm21Any material, including 3 mm wood and acrylic
4 × 1.89 in (102 × 48 mm)5.2 mm1,165 mm10Any material, including 3 mm wood and acrylic
6 × 2.84 in (152 × 72 mm)7.8 mm1,748 mm4Any material, including 3 mm wood and acrylic
8 × 3.78 in (203 × 96 mm)10 mm2,331 mm3Any material, including 3 mm wood and acrylic
12 × 5.68 in (305 × 144 mm)16 mm3,496 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Leopard outline with spots All 12 leopards Walking leopard with rosettes →