Free leopard SVG

Leopard cub sitting SVG

Leopard cub sitting, as a solid black shape
Leopard cub sitting. The preview is the SVG file itself.

A leopard cub sitting and facing you, with a round face, big ears, a few bold spots and a spotted tail out to one side. Thick everywhere, for nursery walls, felt and birthday cards.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size87 × 100 mm (3.42 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut30: 1 outer edge and 29 cut-outs
Cut length980 mm at this size
Narrowest part2.3 mm at this size
Nodes334 curve and line segments

Measured from the file. PNG: 1,746 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.58 mm249 mm110Fine detail: vinyl and paper only, weed with care
1.74 × 2 in (44 × 51 mm)1.2 mm498 mm30Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)1.8 mm747 mm12Vinyl, card and thin sheet
3.47 × 4 in (88 × 102 mm)2.3 mm996 mm6Vinyl, card and thin sheet
5.21 × 6 in (132 × 152 mm)3.5 mm1,494 mm2Any material, including 3 mm wood and acrylic
6.94 × 8 in (176 × 203 mm)4.7 mm1,991 mm1Any material, including 3 mm wood and acrylic
10.42 × 12 in (265 × 305 mm)7 mm2,987 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Snow leopard on a rock ledge All 12 leopards Leopard lying down →