Free leopard SVG

Leopard lying down SVG

Leopard lying down, as a solid black shape
Leopard lying down. The preview is the SVG file itself.

A leopard at rest with its head up, front legs stretched out in front and its tail curled up behind. Long and low with a level underside, for the foot of a sign or the edge of a shelf.

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 51 mm (3.94 × 2.01 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut55: 1 outer edge and 54 cut-outs
Cut length828 mm at this size
Narrowest part1.7 mm at this size
Nodes523 curve and line segments

Measured from the file. PNG: 2,000 × 1,058 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.43 mm210 mm170Too fine for most machines
2 × 1.02 in (51 × 26 mm)0.86 mm421 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.53 in (76 × 39 mm)1.3 mm631 mm21Vinyl, card and thin sheet
4 × 2.04 in (102 × 52 mm)1.7 mm841 mm10Vinyl, card and thin sheet
6 × 3.06 in (152 × 78 mm)2.6 mm1,262 mm3Vinyl, card and thin sheet
8 × 4.08 in (203 × 104 mm)3.5 mm1,682 mm2Any material, including 3 mm wood and acrylic
12 × 6.12 in (305 × 155 mm)5.2 mm2,524 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Leopard cub sitting All 12 leopards Leopard monogram frame →