Free leopard SVG

Leopard outline with spots SVG

Leopard outline with spots, drawn as a line — Leopard outline with spots. The preview is the SVG file itself.

The walking leopard as an even line with its rosettes and dots drawn solid inside. The spots are loose pieces by design, so this one is for pen plotters, engraving, foil and print then cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 47 mm (3.94 × 1.86 in), scales to any size
Pieces	39 separate pieces
Outlines to cut	40: 39 outer edges and 1 cut-out
Cut length	1,231 mm at this size
Narrowest part	1.2 mm at this size
Nodes	666 curve and line segments

Measured from the file. PNG: 2,000 × 987 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.47 in (25 × 12 mm)	0.3 mm	313 mm	180	Too fine for most machines
2 × 0.95 in (51 × 24 mm)	0.61 mm	625 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.42 in (76 × 36 mm)	0.91 mm	938 mm	21	Fine detail: vinyl and paper only, weed with care
4 × 1.89 in (102 × 48 mm)	1.2 mm	1,251 mm	10	Vinyl, card and thin sheet
6 × 2.84 in (152 × 72 mm)	1.8 mm	1,876 mm	4	Vinyl, card and thin sheet
8 × 3.78 in (203 × 96 mm)	2.4 mm	2,501 mm	3	Vinyl, card and thin sheet
12 × 5.68 in (305 × 144 mm)	3.7 mm	3,752 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Leopard monogram frame All 12 leopards Layered leopard in three colours →