Free leopard SVG

Snow leopard on a rock ledge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Snow leopard on a rock ledge, as a solid black shape
Snow leopard on a rock ledge. The preview is the SVG file itself.

A snow leopard standing on a ledge of rock: stockier than its cousin, on short thick legs with big paws, and with the very long, thick tail it wraps round itself in the cold. Large rosettes.

What is in the file

Size100 × 54 mm (3.94 × 2.12 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut59: 1 outer edge and 58 cut-outs
Cut length1,001 mm at this size
Narrowest part1 mm at this size
Nodes635 curve and line segments

Measured from the file. PNG: 2,000 × 1,113 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.25 mm254 mm160Too fine for most machines
2 × 1.08 in (51 × 27 mm)0.51 mm509 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.62 in (76 × 41 mm)0.76 mm763 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.16 in (102 × 55 mm)1 mm1,017 mm10Vinyl, card and thin sheet
6 × 3.23 in (152 × 82 mm)1.5 mm1,526 mm3Vinyl, card and thin sheet
8 × 4.31 in (203 × 110 mm)2 mm2,034 mm2Vinyl, card and thin sheet
12 × 6.47 in (305 × 164 mm)3 mm3,051 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Leopard face All 12 leopards Leopard cub sitting →