Free leopard SVG

Leopard face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leopard face, as a solid black shape
Leopard face. The preview is the SVG file itself.

A leopard face from the front: small round ears set wide, slanted eyes, a broad nose and whisker dots, with small spots across the brow and cheeks. Exactly symmetrical.

What is in the file

Size95 × 100 mm (3.76 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut40: 1 outer edge and 39 cut-outs
Cut length1,201 mm at this size
Narrowest part2.8 mm at this size
Nodes377 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,912 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.71 mm305 mm100Fine detail: vinyl and paper only, weed with care
1.91 × 2 in (48 × 51 mm)1.4 mm610 mm25Vinyl, card and thin sheet
2.86 × 3 in (73 × 76 mm)2.1 mm915 mm9Vinyl, card and thin sheet
3.82 × 4 in (97 × 102 mm)2.8 mm1,220 mm6Vinyl, card and thin sheet
5.72 × 6 in (145 × 152 mm)4.3 mm1,830 mm2Any material, including 3 mm wood and acrylic
7.63 × 8 in (194 × 203 mm)5.7 mm2,440 mm1Any material, including 3 mm wood and acrylic
11.45 × 12 in (291 × 305 mm)8.5 mm3,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More leopard SVG files

← Leaping leopard All 12 leopards Snow leopard on a rock ledge →