Free koala SVG

Koala with a crown of gum leaves SVG

Koala with a crown of gum leaves, as a solid black shape — Koala with a crown of gum leaves. The preview is the SVG file itself.

The koala face with its eyes shut and a crown of gum leaves and three gumnut blossoms across its brow. For baby showers, nursery prints and birthday invitations.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.54 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	18: 1 outer edge and 17 cut-outs
Cut length	772 mm at this size
Narrowest part	2.7 mm at this size
Nodes	435 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.69 mm	196 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.29 in (51 × 33 mm)	1.4 mm	392 mm	40	Vinyl, card and thin sheet
3 × 1.94 in (76 × 49 mm)	2.1 mm	588 mm	15	Vinyl, card and thin sheet
4 × 2.58 in (102 × 66 mm)	2.7 mm	784 mm	8	Vinyl, card and thin sheet
6 × 3.88 in (152 × 98 mm)	4.1 mm	1,177 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.17 in (203 × 131 mm)	5.5 mm	1,569 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.75 in (305 × 197 mm)	8.2 mm	2,353 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Mandala koala face All 12 koalas Baby koala sitting with a leaf →