Free koala SVG

Koala face SVG

Koala face, as a solid black shape
Koala face. The preview is the SVG file itself.

A koala face from the front: a wide round head, two big fluffy ears with the insides cut out, small round eyes and the large oval nose, outlined by a cut that is open at the top. Exactly symmetrical.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.54 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length613 mm at this size
Narrowest part2.8 mm at this size
Nodes313 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.71 mm156 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.29 in (51 × 33 mm)1.4 mm311 mm40Vinyl, card and thin sheet
3 × 1.94 in (76 × 49 mm)2.1 mm467 mm15Vinyl, card and thin sheet
4 × 2.58 in (102 × 66 mm)2.8 mm623 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 98 mm)4.3 mm934 mm2Any material, including 3 mm wood and acrylic
8 × 5.17 in (203 × 131 mm)5.7 mm1,246 mm2Any material, including 3 mm wood and acrylic
12 × 7.75 in (305 × 197 mm)8.5 mm1,868 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Koala face outline All 12 koalas Koala bear hugging a tree →