Free koala SVG

Koala face outline SVG

Koala face outline, drawn as a line — Koala face outline. The preview is the SVG file itself.

The koala face as a line drawing: the head, both fluffy ears and their insides, two eyes set close to the big nose and a small smile. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.57 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	1,105 mm at this size
Narrowest part	1.5 mm at this size
Nodes	600 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,333 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 17 mm)	0.38 mm	281 mm	140	Too fine for most machines
2 × 1.31 in (51 × 33 mm)	0.76 mm	561 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.96 in (76 × 50 mm)	1.1 mm	842 mm	15	Vinyl, card and thin sheet
4 × 2.61 in (102 × 66 mm)	1.5 mm	1,123 mm	8	Vinyl, card and thin sheet
6 × 3.92 in (152 × 100 mm)	2.3 mm	1,684 mm	2	Vinyl, card and thin sheet
8 × 5.22 in (203 × 133 mm)	3 mm	2,245 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.84 in (305 × 199 mm)	4.6 mm	3,368 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Peeking koala All 12 koalas Koala face →