Free koala SVG

Koala mother with a joey on her back SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Koala mother with a joey on her back, as a solid black shape
Koala mother with a joey on her back. The preview is the SVG file itself.

The koala on its tree with a joey riding on its back, peering over one shoulder. The small face has the same eyes, nose and ears as the big one, with cut lines kept wide enough to weed.

What is in the file

Size56 × 100 mm (2.2 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length821 mm at this size
Narrowest part1.4 mm at this size
Nodes524 curve and line segments

Measured from the file. PNG: 1,154 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.36 mm209 mm160Too fine for most machines
1.12 × 2 in (28 × 51 mm)0.71 mm417 mm45Fine detail: vinyl and paper only, weed with care
1.68 × 3 in (43 × 76 mm)1.1 mm626 mm18Vinyl, card and thin sheet
2.24 × 4 in (57 × 102 mm)1.4 mm834 mm10Vinyl, card and thin sheet
3.36 × 6 in (85 × 152 mm)2.1 mm1,251 mm3Vinyl, card and thin sheet
4.48 × 8 in (114 × 203 mm)2.8 mm1,668 mm2Vinyl, card and thin sheet
6.72 × 12 in (171 × 305 mm)4.3 mm2,502 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Koala bear hugging a tree All 12 koalas Koala silhouette on a tree →