Free koala SVG

Koala bear hugging a tree SVG

Koala bear hugging a tree, as a solid black shape
Koala bear hugging a tree. The preview is the SVG file itself.

A koala clinging to a gum tree and looking out at you, one arm and one leg wrapped round the trunk and a spray of leaves on a twig above. Trunk, leaves and koala are one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size47 × 100 mm (1.86 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length701 mm at this size
Narrowest part1.7 mm at this size
Nodes402 curve and line segments

Measured from the file. PNG: 987 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.47 × 1 in (12 × 25 mm)0.43 mm178 mm180Too fine for most machines
0.95 × 2 in (24 × 51 mm)0.86 mm356 mm50Fine detail: vinyl and paper only, weed with care
1.42 × 3 in (36 × 76 mm)1.3 mm534 mm21Vinyl, card and thin sheet
1.89 × 4 in (48 × 102 mm)1.7 mm712 mm10Vinyl, card and thin sheet
2.84 × 6 in (72 × 152 mm)2.6 mm1,068 mm4Vinyl, card and thin sheet
3.78 × 8 in (96 × 203 mm)3.5 mm1,424 mm3Any material, including 3 mm wood and acrylic
5.68 × 12 in (144 × 305 mm)5.2 mm2,137 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Koala face All 12 koalas Koala mother with a joey on her back →