Free koala SVG

Koala hugging a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Koala hugging a heart, as a solid black shape
Koala hugging a heart. The preview is the SVG file itself.

A koala looking over the top of a big heart with a paw laid over each side. The heart is left solid and the face keeps its eyes, nose and fluffy ears. Exactly symmetrical.

What is in the file

Size78 × 100 mm (3.05 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length748 mm at this size
Narrowest part1.2 mm at this size
Nodes393 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,567 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.3 mm190 mm120Too fine for most machines
1.55 × 2 in (39 × 51 mm)0.61 mm380 mm30Fine detail: vinyl and paper only, weed with care
2.32 × 3 in (59 × 76 mm)0.91 mm570 mm12Fine detail: vinyl and paper only, weed with care
3.1 × 4 in (79 × 102 mm)1.2 mm760 mm6Vinyl, card and thin sheet
4.65 × 6 in (118 × 152 mm)1.8 mm1,140 mm2Vinyl, card and thin sheet
6.2 × 8 in (157 × 203 mm)2.4 mm1,520 mm1Vinyl, card and thin sheet
9.3 × 12 in (236 × 305 mm)3.7 mm2,280 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Sleeping koala on a branch All 12 koalas Peeking koala →