Free koala SVG

Sleeping koala on a branch SVG

Sleeping koala on a branch, as a solid black shape — Sleeping koala on a branch. The preview is the SVG file itself.

A koala draped along a bough fast asleep, chin on the wood and all four legs hanging down, with gum leaves at both ends of the branch. A long, low design for shelves, door plates and bookmarks.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 45 mm (3.94 × 1.78 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	513 mm at this size
Narrowest part	2.3 mm at this size
Nodes	377 curve and line segments

Measured from the file. PNG: 2,000 × 944 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 11 mm)	0.58 mm	130 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.9 in (51 × 23 mm)	1.2 mm	261 mm	55	Vinyl, card and thin sheet
3 × 1.35 in (76 × 34 mm)	1.8 mm	391 mm	21	Vinyl, card and thin sheet
4 × 1.8 in (102 × 46 mm)	2.3 mm	521 mm	12	Vinyl, card and thin sheet
6 × 2.71 in (152 × 69 mm)	3.5 mm	782 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.61 in (203 × 92 mm)	4.7 mm	1,042 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.41 in (305 × 137 mm)	7 mm	1,564 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More koala SVG files

← Baby koala sitting with a leaf All 12 koalas Koala hugging a heart →