Free I Do SVG

I Do in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do in Kaushan Script, as a solid black shape
I Do in Kaushan Script. The preview is the SVG file itself.

“I Do” set in Kaushan Script, a lively brush script. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 49 mm (3.94 × 1.92 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length542 mm at this size
Narrowest part1.8 mm at this size
Nodes96 curve and line segments

Measured from the file. PNG: 2,000 × 1,013 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.46 mm138 mm170Too fine for most machines
2 × 0.97 in (51 × 25 mm)0.91 mm275 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.46 in (76 × 37 mm)1.4 mm413 mm21Vinyl, card and thin sheet
4 × 1.95 in (102 × 49 mm)1.8 mm551 mm10Vinyl, card and thin sheet
6 × 2.92 in (152 × 74 mm)2.7 mm826 mm3Vinyl, card and thin sheet
8 × 3.9 in (203 × 99 mm)3.7 mm1,101 mm2Any material, including 3 mm wood and acrylic
12 × 5.84 in (305 × 148 mm)5.5 mm1,652 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do in Lobster All 13 I Do designs I Do in Lilita One →