Free I Do SVG

I Do in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do in Amatic SC, as a solid black shape
I Do in Amatic SC. The preview is the SVG file itself.

“I Do” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 74 mm (3.94 × 2.92 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length780 mm at this size
Narrowest part4.5 mm at this size
Nodes157 curve and line segments

Measured from the file. PNG: 2,000 × 1,502 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)1.1 mm198 mm120Vinyl, card and thin sheet
2 × 1.48 in (51 × 38 mm)2.3 mm396 mm35Vinyl, card and thin sheet
3 × 2.22 in (76 × 56 mm)3.4 mm594 mm15Any material, including 3 mm wood and acrylic
4 × 2.96 in (102 × 75 mm)4.6 mm792 mm6Any material, including 3 mm wood and acrylic
6 × 4.45 in (152 × 113 mm)6.9 mm1,189 mm2Any material, including 3 mm wood and acrylic
8 × 5.93 in (203 × 151 mm)9.1 mm1,585 mm1Any material, including 3 mm wood and acrylic
12 × 8.89 in (305 × 226 mm)14 mm2,377 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do in Alfa Slab One All 13 I Do designs I Do in block capitals →