Free I Do SVG

I Do in Pacifico SVG

I Do in Pacifico, as a solid black shape — I Do in Pacifico. The preview is the SVG file itself.

“I Do” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.57 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	4: 3 outer edges and 1 cut-out
Cut length	464 mm at this size
Narrowest part	4.8 mm at this size
Nodes	114 curve and line segments

Measured from the file. PNG: 2,000 × 844 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	1.2 mm	118 mm	200	Vinyl, card and thin sheet
2 × 0.8 in (51 × 20 mm)	2.4 mm	236 mm	60	Vinyl, card and thin sheet
3 × 1.2 in (76 × 30 mm)	3.7 mm	354 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.6 in (102 × 41 mm)	4.9 mm	471 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.39 in (152 × 61 mm)	7.3 mm	707 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.19 in (203 × 81 mm)	9.8 mm	943 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.79 in (305 × 122 mm)	15 mm	1,414 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do with a drop shadow All 12 I Do designs I Do in Lobster →