Free I Do SVG

I Do in block capitals SVG

I Do in block capitals, as a solid black shape — I Do in block capitals. The preview is the SVG file itself.

“I DO” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.61 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	5: 3 outer edges and 2 cut-outs
Cut length	715 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	44 curve and line segments

Measured from the file. PNG: 2,000 × 1,354 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	Over 1.5 mm	182 mm	140	Vinyl, card and thin sheet
2 × 1.33 in (51 × 34 mm)	Over 3 mm	363 mm	35	Any material, including 3 mm wood and acrylic
3 × 1.99 in (76 × 51 mm)	Over 4.6 mm	545 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.66 in (102 × 67 mm)	Over 6.1 mm	726 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.98 in (152 × 101 mm)	Over 9.1 mm	1,090 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.31 in (203 × 135 mm)	Over 12 mm	1,453 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.97 in (305 × 202 mm)	Over 18 mm	2,179 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do in Amatic SC All 12 I Do designs I Do with a swash underline →