Free I Do SVG

I Do outline lettering SVG

I Do outline lettering, drawn as a line — I Do outline lettering. The preview is the SVG file itself.

“I Do” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.54 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	10: 5 outer edges and 5 cut-outs
Cut length	811 mm at this size
Narrowest part	1.4 mm at this size
Nodes	118 curve and line segments

Measured from the file. PNG: 2,000 × 827 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.36 mm	206 mm	200	Too fine for most machines
2 × 0.78 in (51 × 20 mm)	0.71 mm	412 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.17 in (76 × 30 mm)	1.1 mm	618 mm	24	Vinyl, card and thin sheet
4 × 1.56 in (102 × 40 mm)	1.4 mm	824 mm	12	Vinyl, card and thin sheet
6 × 2.34 in (152 × 59 mm)	2.1 mm	1,236 mm	4	Vinyl, card and thin sheet
8 × 3.12 in (203 × 79 mm)	2.8 mm	1,648 mm	3	Vinyl, card and thin sheet
12 × 4.68 in (305 × 119 mm)	4.3 mm	2,472 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do with hearts All 12 I Do designs I Do stencil plate →