Free I Do SVG

I Do stencil plate SVG

I Do stencil plate, as a solid black shape — I Do stencil plate. The preview is the SVG file itself.

A rounded plate with “I DO” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	812 mm at this size
Narrowest part	1.7 mm at this size
Nodes	51 curve and line segments

Measured from the file. PNG: 2,000 × 1,242 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.61 in (25 × 15 mm)	0.43 mm	206 mm	150	Too fine for most machines
2 × 1.21 in (51 × 31 mm)	0.86 mm	412 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.82 in (76 × 46 mm)	1.3 mm	619 mm	18	Vinyl, card and thin sheet
4 × 2.42 in (102 × 62 mm)	1.7 mm	825 mm	8	Vinyl, card and thin sheet
6 × 3.64 in (152 × 92 mm)	2.6 mm	1,237 mm	3	Vinyl, card and thin sheet
8 × 4.85 in (203 × 123 mm)	3.5 mm	1,650 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.27 in (305 × 185 mm)	5.2 mm	2,475 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do outline lettering All 12 I Do designs I Do with a drop shadow →