Free I Do SVG

I Do in Lilita One SVG

I Do in Lilita One, as a solid black shape — I Do in Lilita One. The preview is the SVG file itself.

“I Do” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 42 mm (3.94 × 1.64 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	5: 3 outer edges and 2 cut-outs
Cut length	440 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	70 curve and line segments

Measured from the file. PNG: 2,000 × 879 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.42 in (25 × 11 mm)	Over 1.5 mm	112 mm	190	Vinyl, card and thin sheet
2 × 0.83 in (51 × 21 mm)	Over 3 mm	224 mm	55	Any material, including 3 mm wood and acrylic
3 × 1.25 in (76 × 32 mm)	Over 4.6 mm	335 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.67 in (102 × 42 mm)	Over 6.1 mm	447 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.5 in (152 × 64 mm)	Over 9.1 mm	671 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.34 in (203 × 85 mm)	Over 12 mm	894 mm	3	Any material, including 3 mm wood and acrylic
12 × 5 in (305 × 127 mm)	Over 18 mm	1,341 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do in Kaushan Script All 12 I Do designs I Do in Alfa Slab One →