Free I Do SVG

I Do in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do in Alfa Slab One, as a solid black shape
I Do in Alfa Slab One. The preview is the SVG file itself.

“I Do” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 37 mm (3.94 × 1.47 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length426 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes50 curve and line segments

Measured from the file. PNG: 2,000 × 794 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)Over 1.5 mm108 mm210Vinyl, card and thin sheet
2 × 0.75 in (51 × 19 mm)Over 3 mm216 mm60Any material, including 3 mm wood and acrylic
3 × 1.12 in (76 × 28 mm)Over 4.6 mm325 mm27Any material, including 3 mm wood and acrylic
4 × 1.49 in (102 × 38 mm)Over 6.1 mm433 mm14Any material, including 3 mm wood and acrylic
6 × 2.24 in (152 × 57 mm)Over 9.1 mm649 mm5Any material, including 3 mm wood and acrylic
8 × 2.98 in (203 × 76 mm)Over 12 mm866 mm3Any material, including 3 mm wood and acrylic
12 × 4.48 in (305 × 114 mm)Over 18 mm1,298 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do in Lilita One All 13 I Do designs I Do in Amatic SC →