Free I Do SVG

I Do with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Do with a swash underline, as a solid black shape
I Do with a swash underline. The preview is the SVG file itself.

“I Do” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 50 mm (3.94 × 1.95 in), scales to any size
Pieces4 separate pieces
Outlines to cut5: 4 outer edges and 1 cut-out
Cut length647 mm at this size
Narrowest part4.5 mm at this size
Nodes125 curve and line segments

Measured from the file. PNG: 2,000 × 1,031 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)1.1 mm164 mm170Vinyl, card and thin sheet
2 × 0.99 in (51 × 25 mm)2.3 mm329 mm50Vinyl, card and thin sheet
3 × 1.49 in (76 × 38 mm)3.4 mm493 mm21Any material, including 3 mm wood and acrylic
4 × 1.98 in (102 × 50 mm)4.6 mm657 mm10Any material, including 3 mm wood and acrylic
6 × 2.98 in (152 × 76 mm)6.9 mm986 mm3Any material, including 3 mm wood and acrylic
8 × 3.97 in (203 × 101 mm)9.1 mm1,315 mm2Any material, including 3 mm wood and acrylic
12 × 5.95 in (305 × 151 mm)14 mm1,972 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Do SVG files

← I Do in block capitals All 13 I Do designs I Do with hearts →