Free Hot Cocoa Bar SVG

Hot Cocoa Bar stencil plate SVG

Hot Cocoa Bar stencil plate, as a solid black shape — Hot Cocoa Bar stencil plate. The preview is the SVG file itself.

A rounded plate with “HOT COCOA BAR” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.25 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,468 mm at this size
Narrowest part	1.7 mm at this size
Nodes	287 curve and line segments

Measured from the file. PNG: 2,000 × 1,665 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	0.43 mm	373 mm	110	Too fine for most machines
2 × 1.65 in (51 × 42 mm)	0.86 mm	746 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.48 in (76 × 63 mm)	1.3 mm	1,119 mm	12	Vinyl, card and thin sheet
4 × 3.3 in (102 × 84 mm)	1.7 mm	1,491 mm	6	Vinyl, card and thin sheet
6 × 4.96 in (152 × 126 mm)	2.6 mm	2,237 mm	2	Vinyl, card and thin sheet
8 × 6.61 in (203 × 168 mm)	3.5 mm	2,983 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.91 in (305 × 252 mm)	5.2 mm	4,474 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar outline lettering All 12 Hot Cocoa Bar designs Hot Cocoa Bar with a drop shadow →