Free Hot Cocoa Bar SVG

Hot Cocoa Bar with a drop shadow SVG

Hot Cocoa Bar with a drop shadow, in layered colours
Hot Cocoa Bar with a drop shadow. The preview is the SVG file itself.

“Hot Cocoa Bar” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 57 mm (3.94 × 2.22 in), scales to any size
Pieces8 separate pieces
Outlines to cut21: 8 outer edges and 13 cut-outs
Cut length1,250 mm at this size
Narrowest part3.4 mm at this size
Nodes488 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,163 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.86 mm318 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.13 in (51 × 29 mm)1.7 mm635 mm45Vinyl, card and thin sheet
3 × 1.7 in (76 × 43 mm)2.6 mm952 mm18Vinyl, card and thin sheet
4 × 2.26 in (102 × 57 mm)3.5 mm1,270 mm8Any material, including 3 mm wood and acrylic
6 × 3.39 in (152 × 86 mm)5.2 mm1,905 mm3Any material, including 3 mm wood and acrylic
8 × 4.52 in (203 × 115 mm)6.9 mm2,540 mm2Any material, including 3 mm wood and acrylic
12 × 6.78 in (305 × 172 mm)10 mm3,810 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar stencil plate All 12 Hot Cocoa Bar designs Hot Cocoa Bar in Pacifico →