Free Hot Cocoa Bar SVG

Hot Cocoa Bar in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hot Cocoa Bar in Lobster, as a solid black shape
Hot Cocoa Bar in Lobster. The preview is the SVG file itself.

“Hot Cocoa Bar” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 56 mm (3.94 × 2.21 in), scales to any size
Pieces5 separate pieces
Outlines to cut10: 5 outer edges and 5 cut-outs
Cut length808 mm at this size
Narrowest part1 mm at this size
Nodes223 curve and line segments

Measured from the file. PNG: 2,000 × 1,158 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.25 mm205 mm160Too fine for most machines
2 × 1.12 in (51 × 29 mm)0.51 mm410 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.69 in (76 × 43 mm)0.76 mm616 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.25 in (102 × 57 mm)1 mm821 mm8Vinyl, card and thin sheet
6 × 3.37 in (152 × 86 mm)1.5 mm1,231 mm3Vinyl, card and thin sheet
8 × 4.5 in (203 × 114 mm)2 mm1,642 mm2Vinyl, card and thin sheet
12 × 6.74 in (305 × 171 mm)3 mm2,463 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar in Pacifico All 13 Hot Cocoa Bar designs Hot Cocoa Bar in Kaushan Script →