Free Hot Cocoa Bar SVG

Hot Cocoa Bar in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hot Cocoa Bar in Alfa Slab One, as a solid black shape
Hot Cocoa Bar in Alfa Slab One. The preview is the SVG file itself.

“Hot Cocoa Bar” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 38 mm (3.94 × 1.48 in), scales to any size
Pieces11 separate pieces
Outlines to cut18: 11 outer edges and 7 cut-outs
Cut length633 mm at this size
Narrowest part1.9 mm at this size
Nodes189 curve and line segments

Measured from the file. PNG: 2,000 × 800 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)0.48 mm161 mm210Too fine for most machines
2 × 0.75 in (51 × 19 mm)0.97 mm322 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.13 in (76 × 29 mm)1.4 mm482 mm27Vinyl, card and thin sheet
4 × 1.5 in (102 × 38 mm)1.9 mm643 mm14Vinyl, card and thin sheet
6 × 2.26 in (152 × 57 mm)2.9 mm965 mm4Vinyl, card and thin sheet
8 × 3.01 in (203 × 76 mm)3.9 mm1,286 mm3Any material, including 3 mm wood and acrylic
12 × 4.51 in (305 × 115 mm)5.8 mm1,929 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar in Lilita One All 13 Hot Cocoa Bar designs Hot Cocoa Bar in Amatic SC →