Free Hot Cocoa Bar SVG

Hot Cocoa Bar in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hot Cocoa Bar in Amatic SC, as a solid black shape
Hot Cocoa Bar in Amatic SC. The preview is the SVG file itself.

“Hot Cocoa Bar” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 71 mm (3.94 × 2.8 in), scales to any size
Pieces11 separate pieces
Outlines to cut19: 11 outer edges and 8 cut-outs
Cut length1,142 mm at this size
Narrowest part1.1 mm at this size
Nodes381 curve and line segments

Measured from the file. PNG: 2,000 × 1,442 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.28 mm290 mm130Too fine for most machines
2 × 1.42 in (51 × 36 mm)0.56 mm580 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.13 in (76 × 54 mm)0.84 mm870 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.84 in (102 × 72 mm)1.1 mm1,160 mm8Vinyl, card and thin sheet
6 × 4.26 in (152 × 108 mm)1.7 mm1,740 mm2Vinyl, card and thin sheet
8 × 5.68 in (203 × 144 mm)2.2 mm2,321 mm2Vinyl, card and thin sheet
12 × 8.52 in (305 × 216 mm)3.4 mm3,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar in Alfa Slab One All 13 Hot Cocoa Bar designs Hot Cocoa Bar in block capitals →