Free Hot Cocoa Bar SVG

Hot Cocoa Bar in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hot Cocoa Bar in Pacifico, as a solid black shape
Hot Cocoa Bar in Pacifico. The preview is the SVG file itself.

“Hot Cocoa Bar” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 55 mm (3.94 × 2.17 in), scales to any size
Pieces5 separate pieces
Outlines to cut12: 5 outer edges and 7 cut-outs
Cut length734 mm at this size
Narrowest part1.4 mm at this size
Nodes257 curve and line segments

Measured from the file. PNG: 2,000 × 1,138 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.36 mm186 mm160Too fine for most machines
2 × 1.1 in (51 × 28 mm)0.71 mm373 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.66 in (76 × 42 mm)1.1 mm559 mm18Vinyl, card and thin sheet
4 × 2.21 in (102 × 56 mm)1.4 mm746 mm10Vinyl, card and thin sheet
6 × 3.31 in (152 × 84 mm)2.1 mm1,119 mm3Vinyl, card and thin sheet
8 × 4.42 in (203 × 112 mm)2.8 mm1,491 mm2Vinyl, card and thin sheet
12 × 6.62 in (305 × 168 mm)4.3 mm2,237 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar with a mug of hot chocolate All 13 Hot Cocoa Bar designs Hot Cocoa Bar in Lobster →