Free Hot Cocoa Bar SVG

Hot Cocoa Bar in Lilita One SVG

Hot Cocoa Bar in Lilita One, as a solid black shape
Hot Cocoa Bar in Lilita One. The preview is the SVG file itself.

“Hot Cocoa Bar” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 43 mm (3.94 × 1.7 in), scales to any size
Pieces11 separate pieces
Outlines to cut18: 11 outer edges and 7 cut-outs
Cut length606 mm at this size
Narrowest part3 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 908 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.76 mm154 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.86 in (51 × 22 mm)1.5 mm308 mm55Vinyl, card and thin sheet
3 × 1.3 in (76 × 33 mm)2.3 mm462 mm24Vinyl, card and thin sheet
4 × 1.73 in (102 × 44 mm)3 mm616 mm12Any material, including 3 mm wood and acrylic
6 × 2.59 in (152 × 66 mm)4.6 mm924 mm4Any material, including 3 mm wood and acrylic
8 × 3.46 in (203 × 88 mm)6.1 mm1,231 mm3Any material, including 3 mm wood and acrylic
12 × 5.18 in (305 × 132 mm)9.1 mm1,847 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar in Kaushan Script All 12 Hot Cocoa Bar designs Hot Cocoa Bar in Alfa Slab One →