Free Hot Cocoa Bar SVG

Hot Cocoa Bar outline lettering SVG

Hot Cocoa Bar outline lettering, drawn as a line — Hot Cocoa Bar outline lettering. The preview is the SVG file itself.

“Hot Cocoa Bar” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 41 mm (3.94 × 1.61 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	36: 14 outer edges and 22 cut-outs
Cut length	1,032 mm at this size
Narrowest part	1.4 mm at this size
Nodes	328 curve and line segments

Measured from the file. PNG: 2,000 × 863 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.41 in (25 × 10 mm)	0.36 mm	262 mm	200	Too fine for most machines
2 × 0.82 in (51 × 21 mm)	0.71 mm	524 mm	55	Fine detail: vinyl and paper only, weed with care
3 × 1.23 in (76 × 31 mm)	1.1 mm	786 mm	24	Vinyl, card and thin sheet
4 × 1.64 in (102 × 42 mm)	1.4 mm	1,049 mm	12	Vinyl, card and thin sheet
6 × 2.45 in (152 × 62 mm)	2.1 mm	1,573 mm	4	Vinyl, card and thin sheet
8 × 3.27 in (203 × 83 mm)	2.8 mm	2,097 mm	3	Vinyl, card and thin sheet
12 × 4.91 in (305 × 125 mm)	4.3 mm	3,146 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar with stars All 12 Hot Cocoa Bar designs Hot Cocoa Bar stencil plate →