Free Hot Cocoa Bar SVG

Hot Cocoa Bar in script and capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hot Cocoa Bar in script and capitals, as a solid black shape
Hot Cocoa Bar in script and capitals. The preview is the SVG file itself.

“Hot Cocoa” in Pacifico script over “BAR” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

What is in the file

Size100 × 87 mm (3.94 × 3.43 in), scales to any size
Pieces6 separate pieces
Outlines to cut16: 6 outer edges and 10 cut-outs
Cut length1,332 mm at this size
Narrowest part1.4 mm at this size
Nodes245 curve and line segments

Measured from the file. PNG: 2,000 × 1,750 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.87 in (25 × 22 mm)0.36 mm338 mm110Too fine for most machines
2 × 1.74 in (51 × 44 mm)0.71 mm677 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.61 in (76 × 66 mm)1.1 mm1,015 mm12Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)1.4 mm1,353 mm6Vinyl, card and thin sheet
6 × 5.22 in (152 × 133 mm)2.1 mm2,030 mm2Vinyl, card and thin sheet
8 × 6.96 in (203 × 177 mm)2.8 mm2,707 mm1Vinyl, card and thin sheet
12 × 10.44 in (305 × 265 mm)4.3 mm4,060 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa Bar SVG files

← Hot Cocoa Bar in block capitals All 13 Hot Cocoa Bar designs Hot Cocoa Bar with stars →