Free hat SVG

Fedora hat with a feather SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fedora hat with a feather, as a solid black shape — Fedora hat with a feather. The preview is the SVG file itself.

A fedora seen from just off the front: a creased crown with a pinch at one side, a brim that dips at the front and lifts at the back, a ribbon band and a small feather tucked into it.

What is in the file

Size	100 × 51 mm (3.94 × 1.99 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	429 mm at this size
Narrowest part	2.2 mm at this size
Nodes	65 curve and line segments

Measured from the file. PNG: 2,000 × 1,050 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.51 in (25 × 13 mm)	0.56 mm	109 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 1.01 in (51 × 26 mm)	1.1 mm	218 mm	50	Vinyl, card and thin sheet
3 × 1.52 in (76 × 39 mm)	1.7 mm	327 mm	21	Vinyl, card and thin sheet
4 × 2.02 in (102 × 51 mm)	2.2 mm	436 mm	10	Vinyl, card and thin sheet
6 × 3.04 in (152 × 77 mm)	3.4 mm	654 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.05 in (203 × 103 mm)	4.5 mm	872 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.07 in (305 × 154 mm)	6.7 mm	1,308 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hat SVG files

← Bowler hat All 18 hats Beanie hat with a pompom →