Top hat with a ribbon band SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tall top hat from the front: a crown that flares a little towards the top, a curled brim and a ribbon cut as an open strip above it. Exactly mirrored. For weddings, magic shows and New Year cards.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.85 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 440 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 38 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,471 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 18 mm) | 0.79 mm | 112 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.45 in (51 × 37 mm) | 1.6 mm | 224 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.17 in (76 × 55 mm) | 2.4 mm | 335 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.9 in (102 × 74 mm) | 3.1 mm | 447 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.35 in (152 × 110 mm) | 4.7 mm | 671 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.8 in (203 × 147 mm) | 6.3 mm | 894 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.7 in (305 × 221 mm) | 9.4 mm | 1,341 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hat SVG files
-
Top hat silhouette with a cane Solid · one piece -
Party hat with a pompom Solid · one piece -
Birthday hat with a star Solid · one piece -
Sombrero hat with a zigzag band Solid · one piece -
Elf hat with ears and a bell Solid · one piece -
Jester hat with three bells Solid · one piece -
Wizard hat with stars and a moon Solid · one piece -
Derby hat with a rose and feathers Solid · one piece
← Layered bobble hat in four colours All 18 hats Top hat silhouette with a cane →