Layered bobble hat in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Four layers to stack, tipped to one side: a navy knitted hat, a cream cuff, two red zigzag bands across the crown and a cream pompom. Cut each from its own sheet and build up from the back.
What is in the file
| Size | 78 × 100 mm (3.06 × 3.94 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 5 outlines |
| Cut length | 982 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 137 curve and line segments |
| Layers | 4: hat, cuff, bands and pompom |
Measured from the file. PNG: 1,571 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.78 × 1 in (20 × 25 mm) | Over 1.5 mm | 249 mm | 120 | Vinyl, card and thin sheet |
| 1.55 × 2 in (39 × 51 mm) | Over 3 mm | 499 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.33 × 3 in (59 × 76 mm) | Over 4.6 mm | 748 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.11 × 4 in (79 × 102 mm) | Over 6.1 mm | 998 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.66 × 6 in (118 × 152 mm) | Over 9.1 mm | 1,497 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.22 × 8 in (158 × 203 mm) | Over 12 mm | 1,995 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.32 × 12 in (237 × 305 mm) | Over 18 mm | 2,993 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hat SVG files
-
Top hat with a ribbon band Solid · one piece -
Top hat silhouette with a cane Solid · one piece -
Party hat with a pompom Solid · one piece -
Birthday hat with a star Solid · one piece -
Sombrero hat with a zigzag band Solid · one piece -
Elf hat with ears and a bell Solid · one piece -
Jester hat with three bells Solid · one piece -
Wizard hat with stars and a moon Solid · one piece