Top hat outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The top hat as an even line: the crown, the curled brim and the two edges of the ribbon. The same on both sides. For colouring pages, foil, engraving and pen plotters.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.85 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 915 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 73 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,471 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 18 mm) | 0.43 mm | 232 mm | 130 | Too fine for most machines |
| 2 × 1.45 in (51 × 37 mm) | 0.86 mm | 465 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.17 in (76 × 55 mm) | 1.3 mm | 697 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.9 in (102 × 74 mm) | 1.7 mm | 930 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.35 in (152 × 110 mm) | 2.6 mm | 1,394 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.8 in (203 × 147 mm) | 3.5 mm | 1,859 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.7 in (305 × 221 mm) | 5.2 mm | 2,789 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hat SVG files
-
Layered bobble hat in four colours Layered · 5 pieces -
Top hat with a ribbon band Solid · one piece -
Top hat silhouette with a cane Solid · one piece -
Party hat with a pompom Solid · one piece -
Birthday hat with a star Solid · one piece -
Sombrero hat with a zigzag band Solid · one piece -
Elf hat with ears and a bell Solid · one piece -
Jester hat with three bells Solid · one piece
← Magician hat with a rabbit All 18 hats Layered bobble hat in four colours →