Top hat silhouette with a cane SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A stovepipe hat standing on a flat base with a walking cane leaning against its crown, all one solid shape with nothing cut out. The level base makes it a good layer for a shadow box.
What is in the file
| Size | 100 × 76 mm (3.94 × 3 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 499 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 33 curve and line segments |
Measured from the file. PNG: 2,000 × 1,542 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | Over 1.5 mm | 127 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.52 in (51 × 39 mm) | Over 3 mm | 253 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 2.29 in (76 × 58 mm) | Over 4.6 mm | 380 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.05 in (102 × 77 mm) | Over 6.1 mm | 507 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.57 in (152 × 116 mm) | Over 9.1 mm | 760 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.1 in (203 × 155 mm) | Over 12 mm | 1,014 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.14 in (305 × 232 mm) | Over 18 mm | 1,521 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hat SVG files
-
Party hat with a pompom Solid · one piece -
Birthday hat with a star Solid · one piece -
Sombrero hat with a zigzag band Solid · one piece -
Elf hat with ears and a bell Solid · one piece -
Jester hat with three bells Solid · one piece -
Wizard hat with stars and a moon Solid · one piece -
Derby hat with a rose and feathers Solid · one piece -
Floppy sun hat with a bow Solid · one piece
← Top hat with a ribbon band All 18 hats Party hat with a pompom →