Free hat SVG

Floppy sun hat with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Floppy sun hat with a bow, as a solid black shape
Floppy sun hat with a bow. The preview is the SVG file itself.

A summer hat with a soft, wavy brim that droops at both sides, a broad ribbon round the crown and a small bow tied on the front of it. For beach bags, holiday albums and garden signs.

What is in the file

Size100 × 59 mm (3.94 × 2.33 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length499 mm at this size
Narrowest part1.2 mm at this size
Nodes97 curve and line segments

Measured from the file. PNG: 2,000 × 1,213 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.3 mm127 mm150Too fine for most machines
2 × 1.18 in (51 × 30 mm)0.61 mm253 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.77 in (76 × 45 mm)0.91 mm380 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.36 in (102 × 60 mm)1.2 mm507 mm8Vinyl, card and thin sheet
6 × 3.55 in (152 × 90 mm)1.8 mm760 mm3Vinyl, card and thin sheet
8 × 4.73 in (203 × 120 mm)2.4 mm1,014 mm2Vinyl, card and thin sheet
12 × 7.09 in (305 × 180 mm)3.7 mm1,521 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hat SVG files

← Derby hat with a rose and feathers All 18 hats Bowler hat →