Bowler hat SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A bowler from the front: a round, hard crown, a short brim that curls up at each side and a ribbon cut as an open strip. Exactly mirrored. For moustache party props and gentlemen’s cards.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.35 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 400 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 26 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,223 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.81 mm | 102 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.19 in (51 × 30 mm) | 1.6 mm | 203 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.79 in (76 × 45 mm) | 2.4 mm | 305 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.38 in (102 × 61 mm) | 3.3 mm | 406 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.58 in (152 × 91 mm) | 4.9 mm | 610 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.77 in (203 × 121 mm) | 6.5 mm | 813 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.15 in (305 × 182 mm) | 9.8 mm | 1,219 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hat SVG files
-
Fedora hat with a feather Solid · one piece -
Beanie hat with a pompom Solid · one piece -
Baseball cap hat from the side Solid · one piece -
Bucket hat with a fishing hook Solid · one piece -
Magician hat with a rabbit Solid · one piece -
Top hat outline Outline · one piece -
Layered bobble hat in four colours Layered · 5 pieces -
Top hat with a ribbon band Solid · one piece
← Floppy sun hat with a bow All 18 hats Fedora hat with a feather →