Baseball cap hat from the side SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A plain ball cap in side view: a rounded crown with two seams and a button on top, three eyelets, a curved peak with a row of stitching and the gap above the strap at the back.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 552 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 64 curve and line segments |
Measured from the file. PNG: 2,000 × 1,119 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.74 mm | 140 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.08 in (51 × 28 mm) | 1.5 mm | 280 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.63 in (76 × 41 mm) | 2.2 mm | 421 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.17 in (102 × 55 mm) | 2.9 mm | 561 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.25 in (152 × 83 mm) | 4.4 mm | 841 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.34 in (203 × 110 mm) | 5.9 mm | 1,122 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.5 in (305 × 165 mm) | 8.8 mm | 1,682 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hat SVG files
-
Bucket hat with a fishing hook Solid · one piece -
Magician hat with a rabbit Solid · one piece -
Top hat outline Outline · one piece -
Layered bobble hat in four colours Layered · 5 pieces -
Top hat with a ribbon band Solid · one piece -
Top hat silhouette with a cane Solid · one piece -
Party hat with a pompom Solid · one piece -
Birthday hat with a star Solid · one piece
← Beanie hat with a pompom All 18 hats Bucket hat with a fishing hook →