Free hammer SVG

Hammer and saw crossed SVG

Hammer and saw crossed, as a solid black shape — Hammer and saw crossed. The preview is the SVG file itself.

A claw hammer crossed with a hand saw, the hammer in front and the saw’s teeth turned outwards. The carpenter’s pair, for a workshop door or a joiner’s card.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	84 × 100 mm (3.3 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	772 mm at this size
Narrowest part	2.6 mm at this size
Nodes	130 curve and line segments

Measured from the file. PNG: 1,690 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.84 × 1 in (21 × 25 mm)	0.66 mm	196 mm	110	Fine detail: vinyl and paper only, weed with care
1.68 × 2 in (43 × 51 mm)	1.3 mm	392 mm	30	Vinyl, card and thin sheet
2.52 × 3 in (64 × 76 mm)	2 mm	588 mm	12	Vinyl, card and thin sheet
3.36 × 4 in (85 × 102 mm)	2.6 mm	784 mm	6	Vinyl, card and thin sheet
5.03 × 6 in (128 × 152 mm)	4 mm	1,177 mm	2	Any material, including 3 mm wood and acrylic
6.71 × 8 in (170 × 203 mm)	5.3 mm	1,569 mm	1	Any material, including 3 mm wood and acrylic
10.07 × 12 in (256 × 305 mm)	7.9 mm	2,353 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammer SVG files

← Hammer driving a nail All 15 hammers Hammer and chisel crossed →