Hammer monogram frame SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A ring with two claw hammers crossed behind it, heads above and grips below. The middle is open for initials, a house number or the name of a workshop.
What is in the file
| Size | 100 × 96 mm (3.94 × 3.78 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 785 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 104 curve and line segments |
Measured from the file. PNG: 2,000 × 1,923 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.96 in (25 × 24 mm) | 0.46 mm | 199 mm | 100 | Too fine for most machines |
| 2 × 1.92 in (51 × 49 mm) | 0.91 mm | 399 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.88 in (76 × 73 mm) | 1.4 mm | 598 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.84 in (102 × 98 mm) | 1.8 mm | 798 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.76 in (152 × 146 mm) | 2.7 mm | 1,196 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.68 in (203 × 195 mm) | 3.7 mm | 1,595 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.52 in (305 × 293 mm) | 5.5 mm | 2,393 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More hammer SVG files
-
Hammer outline Outline · one piece
-
Layered hammer in three colours Layered · 3 pieces
-
Claw hammer Solid · one piece
-
Simple hammer icon Solid · one piece
-
Sledgehammer Solid · one piece
-
Wooden mallet hammer Solid · one piece
-
Ball-peen hammer Solid · one piece
-
Gavel hammer on its block Solid · one piece