Free hammer SVG

Hammer outline SVG

Hammer outline, drawn as a line — Hammer outline. The preview is the SVG file itself.

The claw hammer as a single bold line round its whole edge, head, claw, shaft and grip. For colouring sheets, foil, engraving and a child’s first tool chart.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	643 mm at this size
Narrowest part	2.2 mm at this size
Nodes	77 curve and line segments

Measured from the file. PNG: 1,681 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.83 × 1 in (21 × 25 mm)	0.56 mm	163 mm	110	Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)	1.1 mm	327 mm	30	Vinyl, card and thin sheet
2.5 × 3 in (64 × 76 mm)	1.7 mm	490 mm	12	Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)	2.2 mm	653 mm	6	Vinyl, card and thin sheet
5 × 6 in (127 × 152 mm)	3.4 mm	980 mm	2	Any material, including 3 mm wood and acrylic
6.67 × 8 in (169 × 203 mm)	4.5 mm	1,307 mm	1	Any material, including 3 mm wood and acrylic
10.01 × 12 in (254 × 305 mm)	6.7 mm	1,960 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammer SVG files

← Hammer monogram frame All 15 hammers Layered hammer in three colours →