Free hammer SVG

Two crossed hammers SVG

Two crossed hammers, as a solid black shape — Two crossed hammers. The preview is the SVG file itself.

Two claw hammers crossed with their heads up and their faces turned outwards. A short gap either side of the front shaft shows where one lies over the other.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.84 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	789 mm at this size
Narrowest part	2.3 mm at this size
Nodes	115 curve and line segments

Measured from the file. PNG: 1,952 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.58 mm	200 mm	100	Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (50 × 51 mm)	1.2 mm	401 mm	25	Vinyl, card and thin sheet
2.93 × 3 in (74 × 76 mm)	1.8 mm	601 mm	9	Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)	2.3 mm	802 mm	4	Vinyl, card and thin sheet
5.85 × 6 in (149 × 152 mm)	3.5 mm	1,202 mm	2	Any material, including 3 mm wood and acrylic
7.8 × 8 in (198 × 203 mm)	4.7 mm	1,603 mm	1	Any material, including 3 mm wood and acrylic
11.7 × 12 in (297 × 305 mm)	7 mm	2,405 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammer SVG files

← Gavel hammer on its block All 15 hammers Hammer and wrench crossed →