Hammer and chisel crossed SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wooden mallet crossed with a chisel, the tools of a carver or a stonemason. The mallet lies in front, and a thin gap marks its handle where it crosses the chisel.
What is in the file
| Size | 85 × 100 mm (3.35 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 649 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 65 curve and line segments |
Measured from the file. PNG: 1,715 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.85 × 1 in (22 × 25 mm) | 0.53 mm | 165 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.7 × 2 in (43 × 51 mm) | 1.1 mm | 330 mm | 30 | Vinyl, card and thin sheet |
| 2.56 × 3 in (65 × 76 mm) | 1.6 mm | 495 mm | 12 | Vinyl, card and thin sheet |
| 3.41 × 4 in (87 × 102 mm) | 2.1 mm | 659 mm | 6 | Vinyl, card and thin sheet |
| 5.11 × 6 in (130 × 152 mm) | 3.2 mm | 989 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.82 × 8 in (173 × 203 mm) | 4.3 mm | 1,319 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.22 × 12 in (260 × 305 mm) | 6.4 mm | 1,978 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.