Free hammer SVG

Simple hammer icon SVG

Simple hammer icon. The preview is the SVG file itself.

A hammer at its plainest: a block head with a wedge at the back, on a thick straight handle. No fine parts, so it stays clear on a small label or a toolbox drawer.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	93 × 100 mm (3.67 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	315 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	20 curve and line segments

Measured from the file. PNG: 1,867 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.93 × 1 in (24 × 25 mm)	Over 1.5 mm	80 mm	100	Vinyl, card and thin sheet
1.86 × 2 in (47 × 51 mm)	Over 3 mm	160 mm	25	Any material, including 3 mm wood and acrylic
2.79 × 3 in (71 × 76 mm)	Over 4.6 mm	240 mm	12	Any material, including 3 mm wood and acrylic
3.72 × 4 in (95 × 102 mm)	Over 6.1 mm	320 mm	6	Any material, including 3 mm wood and acrylic
5.59 × 6 in (142 × 152 mm)	Over 9.1 mm	480 mm	2	Any material, including 3 mm wood and acrylic
7.45 × 8 in (189 × 203 mm)	Over 12 mm	640 mm	1	Any material, including 3 mm wood and acrylic
11.17 × 12 in (284 × 305 mm)	Over 18 mm	960 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammer SVG files

← Claw hammer All 15 hammers Sledgehammer →