Free hammer SVG

Claw hammer SVG

Claw hammer, as a solid black shape — Claw hammer. The preview is the SVG file itself.

A carpenter’s claw hammer on a slant: a round striking face, a curved claw for pulling nails, a slim shaft and a grip with four lines. The hammer most people picture first.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	406 mm at this size
Narrowest part	2.7 mm at this size
Nodes	48 curve and line segments

Measured from the file. PNG: 1,681 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.83 × 1 in (21 × 25 mm)	0.69 mm	103 mm	110	Fine detail: vinyl and paper only, weed with care
1.67 × 2 in (42 × 51 mm)	1.4 mm	206 mm	30	Vinyl, card and thin sheet
2.5 × 3 in (64 × 76 mm)	2.1 mm	309 mm	12	Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)	2.7 mm	412 mm	6	Vinyl, card and thin sheet
5 × 6 in (127 × 152 mm)	4.1 mm	619 mm	2	Any material, including 3 mm wood and acrylic
6.67 × 8 in (169 × 203 mm)	5.5 mm	825 mm	1	Any material, including 3 mm wood and acrylic
10.01 × 12 in (254 × 305 mm)	8.2 mm	1,237 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammer SVG files

← Layered hammer in three colours All 15 hammers Simple hammer icon →