Free hammer SVG

Gavel hammer on its block SVG

Gavel hammer on its block, as a solid black shape — Gavel hammer on its block. The preview is the SVG file itself.

A judge’s gavel coming down on a round sounding block: a turned head with a band at each end and a turned handle with a knob. For a law graduate, an auction or a club chair.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.2 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	461 mm at this size
Narrowest part	2.6 mm at this size
Nodes	71 curve and line segments

Measured from the file. PNG: 2,000 × 1,642 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 21 mm)	0.66 mm	117 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.63 in (51 × 41 mm)	1.3 mm	234 mm	30	Vinyl, card and thin sheet
3 × 2.44 in (76 × 62 mm)	2 mm	351 mm	12	Vinyl, card and thin sheet
4 × 3.26 in (102 × 83 mm)	2.6 mm	468 mm	6	Vinyl, card and thin sheet
6 × 4.88 in (152 × 124 mm)	4 mm	703 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.51 in (203 × 165 mm)	5.3 mm	937 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.77 in (305 × 248 mm)	7.9 mm	1,405 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hammer SVG files

← Ball-peen hammer All 15 hammers Two crossed hammers →